EasyDriver drives bi-polar motors, and motors wired as bi-polar.

Containing a SD-Card reader, a rotary encoder and a 20 Character x 4 Line LCD display.

Easily upgrade your RAMPS 1.3 and higher to print directly from a MicroSD card.

NEMA17 Stepper motor that is well suited to 3d printers, CNC machines, or any n

Includes plug in stepper drivers and extruder control electronics

High quality machined aluminium T5, 12 Tooth Pulley with a reamed 5mm bore.

Includes 50cm jumper cable for direct connection to RAMPS1.4 or other electronics.

A heated build platform improves printing quality by helping to prevent warping.

Five microstep resolutions operating from 8 – 35 V and approximately 1 A per phase.

GT2 Timing Belt most commonly used for 3d printers.

0.5mm extruder nozzle for 3d Printers using 1.75mm Filament.

0.4mm extruder nozzle for 3d Printers using 3mm Filament.

0.4mm extruder nozzle for 3d Printers using 1.75mm Filament.

0.3mm extruder nozzle for 3d Printers using 3mm Filament.

0.3mm extruder nozzle for 3d Printers using 1.75mm Filament.

0.2mm extruder nozzle for 3d Printers using 1.75mm Filament.

MK3 Dual Power Heated Build platform for a Delta 3D printer.

Stainless Steel Extrusion Gear for 1.75mm Filament

Ceramic Cartridge Heater for a 3D printer.

2 x LM8UU Linear Bushing Ball Bearing 8 x 24mm

8mm 608ZZ Ball bearings. Pack of 10

LM16UU Linear Bushing Ball Bearing with a 28mm outside diameter and 37mm in height.

2 x LM6UU Linear Bushing Ball Bearing 6 x 12mm

Machined aluminium coupler with spiral cut, for shafts that are not perfectly co-linear.