Features a full speed USB 2.0 compliant interface.

Analogue joystick controller with click button.

FTDI cable to work with official Arduino and cloned Arduino boards

Considered to be the easiest and most convenient development tool to learn ARM.

GPS module based on the Ublox NEO-6M, includes built-in 25x25mm active GPS antenna.

Provides connectivity to an Android device via a USB or Bluetooth connection.

Provides connectivity to an Android device via a USB or Bluetooth connection.

Testing and troubleshooting tool can test the performance of USB power sources.

Interface a USB port on a host computer to an Altera FPGA.

Data logging shield for your Arduino. This unit comes fully assembled and ready to use.

Fantastic little 39MF22 solid state relay from SHARP.

Arduino style user experience to the world of powerful 32-bit ARM processors.

For use with the ATMega family of micro-controllers.

For use with the ATMega family of micro-controllers.

Open-source USB AVR programmer and SPI interface with 6 and 10 pin standard ISP cables.

Allows you to convert USB to TTL/CMOS compatible levels and vice versa.

In-Circuit Debugger and Programmer using in-circuit debugging logic.

Supports a host of EEPROM, SPI Flash, and AVR chips

JTAG ICE is AVR Studio's on-chip debugging tool

Wide operating voltage of 2.0-5.5 volts, on-board EEPROM Data Memory, and nanoWa

The Latest ESP8266 has WiFi and TCP/IP stack to get a microcontroller on the Internet.

Single-chip 8-20 second single-message record and playback device.

Perfect for your Arduino based project a small footprint or fewer IO pins.

Components and breadboard for a DIY Arduino.

Components and breadboard for a DIY Arduino Uno.

More pins, more RAM, and more EEPROM !

Use the Ethernet library to connect to the internet via a standard Ethernet jack.

Breadboard friendly Arduino Nano with free USB cable

This board plugs on top of an Arduino MEGA 1280 or 2560.

Breadboard friendly Arduino Nano Without USB Cable.

TTP229 Capacitive touch sensing device designed as a touch pad replace mechanical keys.

SD Card module suitable for any SPI compatible Microprocessor.

Data logging shield for your Arduino. This unit comes fully assembled and ready to use.

Breakout board can easily turn your Arduino into a GPS receiver with SD storage.

Easily connect your Arduino to many frequently used sensor and circuit modules.

Drive high-current motors with this pair of VNH2SP30 full-bridge motor drivers.

Compatible Arduino UNO R3 with Free USB Cable.

HC-06 Serial port Bluetooth module (Slave) breakout board.

7 momentary push buttons and a two-axis thumb joystick.

2 x 16 LCD display and 6 momentary push buttons.

Lead out all digital IO and analog IO ports

This shield enables your Arduino to support an android device.

Control up to 4 stepper motors using 4 A4988 Stepper drivers.

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560

Based on the ATmega328 with 14 digital input/output pins, 6 analog inputs, and a

Here we have an Attiny85 breakout board wich is essentially a Digispark USB