Altera USB Blaster

£ 6.20

FREE DELIVERY

Altera's USB-Blaster Download Cable interfaces a USB port on a host computer to an Altera FPGA mounted on a printed circuit board.

The cable sends configuration data from the PC to a standard 10-pin header connected to the FPGA. You can use the USB-Blaster cable to iteratively download configuration data to a system during prototyping or to program data into the system during production.

  • Stratix series FPGAs
  • Cyclone series FPGAs
  • MAX series CPLDs
  • Arria GX series FPGAs
  • APEX series FPGAs
  • ACEX 1K FPGAs
  • Mercury FPGAs
  • FLEX 10K series FPGAs
  • Excalibur FPGAs
  • Altera configuration devices including EPC2 devices
  • Enhanced configuration devices including EPC4, EPC8, and EPC16 devices
  • Serial configuration devices including EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128 devices
  • In addition, you can perform SignalTap II logic analysis
  • The USB-Blaster download cable supports target systems using 5.0-V TTL, 3.3-V LVTTL/LVCMOS, and single-ended I/O standards from 1.5 V to 3.3 V
  • 5.0 V from the USB cable
  • Between 1.5 V and 5.0 V from the target circuit board

Altera USB Blaster